ANALISA TEGANGAN POROS MOBIL LISTRIK TARSIUS X3 MENGGUNAKAN SOFTWARE

Firlya Rosa, Joko Mardi Utomo

Abstract


The development of the automotive industri in Indonesia that uses electrical energy sources is still a competition in the environment of college students. One of them is the Tarsius X3 electric car that has 2 kilowatts of power with a rear drive system that is used to transfer power from the electric motor to the wheels. Development, design and analysis of the drive shaft using software, aims to determine the surface tension and deformation that occurs on the shaft. Stress analysis uses the theory of energy distortion (von mises). Loading on the shaft is based on, electrical motor torsion, the weighing of car and stress of the shaft material permits by conducting tensile testing of the ASTM E-8 method as input for simulating CAD software (Inventor). The software simulation results show that the von mises maximum stress occurs at 162.463 MPa and the minimum stress occurs at 0.0011 MPa. The maximum deformation occurs at4.74 x 10-2mm and a minimum of 0 mm. The stress and deformation that occur is still at the safety factor limit of 3.83 at under static conditions.

 

Keywords: Shaft, Von Mises Stress, Safety Factor, Deformation


Full Text:

Article 2(1)(2019)

References


Gowtham, V. et al. (no date) ‘Fatigue based design and analysis of wheel hub for Student formula car by Simulation Approach’. doi: 10.1088/1757-899X/149/1/012128.

Guan, F. et al. (2011) ‘Application of Optimization Methodology and Specimen-Specific Finite Element Models for Investigating Material Properties of Rat Skull’, Annals of Biomedical Engineering, 39(1), pp. 85–95. doi: 10.1007/s10439-010-0125-0.

Gujar, R. A. and Bhaskar, S. V (2013) ‘Shaft Design under Fatigue Loading By Using Modified Goodman Method’, International Journal of Engineering Research and Applications (IJERA), 3(4), pp. 1061–1066. Available at: www.ijera.com (Accessed: 2 July 2019).

Jayanaidu, P. (2013) ‘Analysis of a Drive Shaft for Automobile Applications’, IOSR Journal of Mechanical and Civil Engineering, 10(2), pp. 43–46. doi: 10.9790/1684-1024346.

Khurmi, R. S. and Gupta, J. K. (2005) A Textbook of Machine Design (S.I. Units), Eurasia Publishing House (PVT.) LTD. doi: 10.1111/j.1537-2995.2005.00659.x.

Kishore, M., Keerthi, J. and Kumar, V. (2016) ‘Design and Analysis of Drive Shaft of an Automobile’, International Journal of Engineering Trends and Technology, 38(6). Available at: http://www.ijettjournal.org (Accessed: 2 July 2019).

Rosa, F. (2017) ‘PERHITUNGAN DIAMETER POROS PENUNJANG HUB PADA MOBIL LISTRIK TARSIUS X3 BERDASARKAN ANALISA TEGANGAN GESER DAN FAKTOR KEAMANAN’, Machine : Jurnal Teknik Mesin, 3(2), pp. 30–34. Available at: http://journal.ubb.ac.id/index.php/machine/article/view/459 (Accessed: 2 July 2019).

Shigley, J. E. and Mitchell., L. D. (1984) Pererencanaan Teknik Mesin Jilid 2. Jakarta: Erlangga.

Utomo, J. M. (2014) Analisa Tegangan Dan Keamanan Poros Mobil Listrik Tarsius X3 Menggunakan Software Solidworks 2013. Universitas Bangka Belitung.

Valetava, K. and jethava PIET, P. (2016) ‘Fatigue and Static Structural Analysis of Car Wheel using Finite Element Method’, International Journal of Technical Innovation In Morden Engineering & Science, 2(2), pp. 19–28. Available at: https://pdfs.semanticscholar.org/f0d4/4701badf7881efd84fc433aeccd53fecd5a5.pdf (Accessed: 2 July 2019).




DOI: http://dx.doi.org/10.36767%2Fturbulen.v2i1.520

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution 3.0 License.

Published by Mechanical Engineering Study Program, Faculty of Engineering, Universitas Tridinanti Palembang

Contact Us:

TURBULEN: Jurnal Teknik Mesin

Phone/WhatsApp/sms : +62821-7853-3625 or +62852-6805-4099

email:jurnal.turbulen@univ-tridinanti.ac.id

e-ISSN: 2656-0186