STUDI EKSPERIMENTAL PENGARUH PROSES PEMBAKARAN TERHADAP SIFAT MEKANIS PADA BAJA TULANGAN

Ella Sundari, Taufikurrahman ., Sepri Alfarizi

Abstract


Reinforcing steel is a very important material contained in the concrete, where it has a function as a tensile load receiver where the concrete is very weak in receiving the tensile load. In the event of concrete and reinforced concrete fires can be complementary because the reinforcing steel can accept tensile load while the concrete can accept the press load. The method of testing conducted in this study using the method of tensile testing, metallography, and composition testing. Where prior to testing the reinforcing steel is first casted in the concrete after it is done combustion process with a temperature of 400 ° C, 600 ° C, 800 ° C and cooled with water and air cooling medium. After done all the testing process got result that is reinforcing steel which has the most optimal tensile stress occurred at temperature of 600 ° C with water cooling media which got value of tensile strength equal to 596,46 N / mm2.

 

Keywords: : Reinforcing Steel, Tensile Test


Full Text:

Article 2(1)(2019)

References


Alfarisi, Salman. 2015. Penjelasan Tentang Diagram Fasa. url: https://www.scribd.com/doc/287464470/Penjelasan-Tentang-Diagram-Fasa (diakses 25/01/2018)

Badan Standarisasi Nasional. 2014. Baja Tulangan Beton. Jakarta: Badan Standarisasi Nasional.

Badan Standarisasi Nasional. 2017. Baja Tulangan Beton SNI 2052 : 2017. Jakarta: Badan Standarisasi Nasional.

Dwi Haryadi, Gunawan. 2006. Pengaruh Suhu Tempering Terhadap Kekerasan, Kekuatan Tarik dan Struktur Mikro Pada Baja K-460. Jurnal Teknik Mesin Vol. 8 No.2 April 2006. Teknik Mesin Universitas Diponegoro Semarang.

Semekto, Hendro. 2016. Kebakaran Rumah dan Gedung. https://belajarbencanalearndisaster.com/bencana-di-indonesia/kebakaran-rumah-dan-gedung/. (diakses 25/01/2018).

Sonowijoyo, Rahman. 2014. Perlakuan Panas Pada Logam. url: https://www.scribd.com/document/218299246/Perlakuan-Panas-Pada-Logam. Diakses 26/01/2018.

Sulendra, I.K, Tatong, B. 2007. Analisis Material Beton Bertulang Pasca Kebakaran dan Metode Perbaikan Elemen Strukturnya. url: http://eprints.undip.ac.id/25061/1/05-BURHAN_TATONG_26-11-2007.pdf. (diakses 25/01/2018).

Umiati, Sri. 2008. Ketahanan Material Baja Sebagai Struktur Bangunan Terhadap Kebakaran. Jurnal No. 29 Vol.1 April 2008. Teknik Sipil Universitas Andalas Sumatera Barat.

Wior, C.E, Wallah, S.E, Pandaleke, R. Kajian Kuat Tekan Beton dan Kuat Tarik Baja Tulangan Gedung Teknik Arsitektur dan Elektro Universitas Samratulangi Manado Pasca Kebakaran. Jurnal Sipil Statik Vol. 3 No.4 April 2015. Teknik Sipil Universitas Samratulangi Manado.

Yana, Meti. 2014. Fungsi Besi Beton. url: https://www.scribd.com/doc/207149964/Fungsi-Besi-Beton. (diakses 25/01/2018).




DOI: http://dx.doi.org/10.36767%2Fturbulen.v2i1.524

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution 3.0 License.

Published by Mechanical Engineering Study Program, Faculty of Engineering, Universitas Tridinanti Palembang

Contact Us:

TURBULEN: Jurnal Teknik Mesin

Phone/WhatsApp/sms : +62821-7853-3625 or +62852-6805-4099

email:jurnal.turbulen@univ-tridinanti.ac.id

e-ISSN: 2656-0186