DESAIN DAN ANALISIS KEKUATAN RANGKA TEMPAT SAMPAH DI BALAI LAPAN GARUT MENGGUNAKAN METODE ELEMEN HINGGA

Lasinta Ari Nendra Wibawa

Abstract


This study examined the design and analysis of the strength of the trash bin frame using the finite element method. The analysis was carried out using Autodesk Inventor Professional 2017. The frame material used was Aluminum 5052 with ISO 10799-2 (Square) standard with the size of 25 x 25 x 2 mm. Variable load of trash bin was 55 kg, 60 kg, 65 kg, and 70 kg. The simulation results show that a load of a trash bin with the weight of 55 kg, 60 kg, 65 kg, and 70 kg had the safety factor of 2,49, 2,28, 2,11, and 1,96.

 

Keywords: aluminum 5052, finite element analysis, strength analysis, autodesk inventor 2017, trash bin  frame


Full Text:

PDF

References


Ravendra A. et al. (2014). Effect of welding parameters on weld characteristics of 5052 Aluminium Alloy sheet using TIG Welding. International Journal of Innovative Research in Science, Engineering and Technology, 3(3), 10302–10309.

V. Dobrovolsky, K. Z. (1978). Machine elements : a textbook. Moscow: Peace Publisher.

Wibawa, L. A. N. (2018a). Merancang Komponen Roket 3D dengan Autodesk Inventor Professional 2017. Buku Katta. Retrieved from https://play.google.com/books/reader?id=qHpKDwAAQBAJ&lr=&printsec=frontcover

Wibawa, L. A. N. (2018b). Simulasi Kekuatan Komponen Sarana Pengujian Roket Menggunakan Autodesk Inventor Professional 2017. Buku Katta. Retrieved from https://play.google.com/books/reader?id=BD1LDwAAQBAJ&hl=id&lr=&printsec=frontcover

Wibawa, L. A. N., & Himawanto, D. A. (2018). Analisis Ketahanan Beban Dinamis Material Turbin Angin Terhadap Kecepatan Putar Rotor (Rpm) Menggunakan Metode Elemen Hingga. Jurnal Simetris, 9(2), 803–808. https://doi.org/10.24176/simet.v9i2.2343

Younis, W. (2010). Up and running with Autodesk Inventor Simulation 2011: a step-by-step guide to engineering design solutions. Elsevier.




DOI: http://dx.doi.org/10.36767%2Fturbulen.v1i2.352

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution 3.0 License.

Published by Mechanical Engineering Study Program, Faculty of Engineering, Universitas Tridinanti Palembang

Contact Us:

TURBULEN: Jurnal Teknik Mesin

Phone/WhatsApp/sms : +62821-7853-3625 or +62852-6805-4099

email:jurnal.turbulen@univ-tridinanti.ac.id

e-ISSN: 2656-0186